Install FIELD

USB audio sampling · 0.1.18-alpha
0.1.18 adds USB audio sampling. In the sampler, press ENV to choose Radio or USB; the header identifies USB. On your computer, choose FIELD as the audio output at 44.1 kHz, 16-bit stereo, then play audio and press REC. Incoming stereo is captured as mono. USB works with Replace, Layer overdubs, all four quality settings and SAVE. SELECT sets live mix and ALGORITHM mutes monitoring without stopping capture. Source changes are locked during recording; leaving the editor restores radio monitoring. The display mirror and existing sample/stream buffers remain. Software tests pass; physical-device USB testing is still needed. Leave FIELD running normally and press Install. Back up your projects first.

Connect the FM-1 by USB, then press Install. It works in Chrome or Edge; the browser asks once to allow MIDI: allow it.

Do not unplug the USB cable while writing.

recovering an FM-1 that won't start

www.m-vave.com/download (opens in a new tab)

Back up first. (opens in a new tab)


  
Back to the stock firmware

  

  
    
    
  1.  FM-1.fwsc
    2. 
    

    3. 
    
  3. 
  

  

  
Report a problem

  

  

    

  

  
  
  
Back to FIELD


Gray and white cat yawning among dry oak leaves
Cheddar Butt
Support A.V. on Buy Me a Coffee (opens in a new tab)




  

    

    
Back up first. 
       (opens in a new tab)